This is a reduced drawing. Original 1 : 10
List of materials
____________________________________________________________________________________
Material Dimensions Quantity/m/kg Rem.
____________________________________________________________________________________
Plywood
WB Ocume, fir
12mm 2.44 x 1.22 m 3 bridge deck, mast support,
8mm 2.44 x 1.22 m 1 bunk, rudder
6mm 2.44 x 1.22 m 19 planking,cabin * bulkheads, decks
4mm 2.44 x 1.22 m 4 forward beam bulkh.pantry, table
dagger board
Birch ply
4mm 2.44 x 1.22 m 2 bridge front
WOOD
Clear fir 20 x 25 mm 90 m stringers, aft beam
Clear fir 25 x 35 mm 50 m chine stringers, mast support etc
Clear fir 25 x 50 mm 4 m stem
Clear fir 25 x 80 mm 12 m keel
Spruce 34 x 20 mm 3 m rudder housing
Spruce 15 x 30 mm 14 m rudder, dagger board
Diverse materials
Epoxy/hardener 40 kg
Aerosil (used silica) 3 kg
Micro spheres 4 kg
Glass fabric 240 gr/m2 50 m2 covering
U.D carbon fiber 300 gr/m2 5cm x 10m rudder/dagger board superstructure
Acrylic glass 4mm 1.2 m2 windows
Fasteners
Particle board screws 2.5 x 25mm 1200 used instead
3.5 x 45mm 600 of clamps
Remove after epoxy is cured
Al tube 36/32 mm 2 m rudder link
Al tube 70/66 mm 6.4 m mast
Al square tube 55x35x2mm 2.1 m boom
U-profile 50x50x4mm .2 m mast step
Stainless steel
bar 60 x 4 mm 0.8m chain plates
Rigging see rigging drawings
Sails see drawings
Engine outboard till 6 HP